How can I dim the LED high bay Lights?
- Categories:Products News
- Author:Fiona Lau
- Origin:
- Time of issue:2022-09-16 16:02
- Views:
(Summary description)ED high bay lights use signal based dimming, this is known as 0-10V dimming, you get dimming levels from 0% equals to OFF, going through 1% to 100% full brightness using 1V to 10V signal. The amount from one to ten volts signal tells the LED driver how bright it should be, actually the driver does the dimming.
How can I dim the LED high bay Lights?
(Summary description)ED high bay lights use signal based dimming, this is known as 0-10V dimming, you get dimming levels from 0% equals to OFF, going through 1% to 100% full brightness using 1V to 10V signal. The amount from one to ten volts signal tells the LED driver how bright it should be, actually the driver does the dimming.
- Categories:Products News
- Author:Fiona Lau
- Origin:
- Time of issue:2022-09-16 16:02
- Views:
For old traditional high bay lights you would only need to restrict the power going to the bulb and in that way you would dim it down. For LED High Bay Lights that type of set up does not work. LED components need DC instead of AC. LED high bay lights use signal based dimming, this is known as 0-10V dimming, you get dimming levels from 0% equals to OFF, going through 1% to 100% full brightness using 1V to 10V signal. The amount from one to ten volts signal tells the LED driver how bright it should be, actually the driver does the dimming.
With the addition of LED components to high bay lights you get many advantages. One of the most important advantages that one can get when using LED High Bay Lights is their enhanced controllability. One of the main controllability features of LED High Bay Lights is their dimming function. LED High Bay Lights can be dimmed from 10% to 100% brightness using a regular 1-10V or 0-10V dimmers and connecting the specifically designated pair of dimming wires to the compatible low voltage LED Dimmer Switch.
If you want to use for example Hero Series' dimming function you can use their purple and pink low voltage dimming wires and connect them to the 1-10V Dimmer . For this type of connection or wiring we suggest you to use low voltage shielded wire, it can be 18awg or 16awg gauge wire.
Our 1-10V Dimmer can be used with groups of up to 700w led high bay lights and still work as an ON – OFF switch, otherwise the 1-10V Dimmer will only dim down the LED High Bay Lights until 10% but will not turn the lights off. Our 1-10V Dimmer has a large rocker for turning ON – OFF or adjusting the preset dimming levels. With its easy to operate slider you can accurately dim or brighten the light produced by the LED High Bay Lights. The 1-10V Dimmer can be easily set up with its minimum light level knob, maximum light level knob and slider (Refer to the 1-10V Dimmer instruction manual for dimming range adjustment steps directions).
This is the shopping link of our dimming high bay light.
If you are looking for realible products for your projects, please kindly visit this shop or contact me freely.
Scan the QR code to read on your phone
TEL: +86-0755-86369100
E-MAIL: Sales010@longsun-led.com
ADD: Room 304, Block B, Building 7, Shenzhen International Innovation Valley, Dashi 1st Rd., Xili Community, Xili St., NanShan Dist.,ShenZhen
Copyright © Shenzhen Long Sun Optoelectronics Technology Co., Ltd 粤ICP备20036433号